Is everything all right after the car film is applied? I don't know. All your efforts to insulate the window glass may be lost! Today, let's take a look at the precautions after the film is pasted on the car?

1. Be sure to go to the store for re-inspection!

Many people think that the acceptance after the film is pasted is the final process, but in fact, the re-inspection after two weeks is the final process. First of all, some minor problems will only appear after two weeks; Secondly, some membranes need to be edge sealed after two weeks. For professional construction stores, only after the re-inspection is confirmed to be OK can the film construction and final delivery be truly completed.

2. If the film edge blisters after film application, do not handle it yourself

The regular construction store should be repaired within 24 hours, and the perfect after-sales service will also be provided. If any problem is found after the film is applied, contact the construction store to deal with it. In addition, the auto film is applied with professional tools and techniques. If you handle it yourself, it will not achieve the desired effect and may cause more problems. However, some of the problems caused by human factors are not recognized in the following after-sales service.

3. Do not lift or lower the window 3-7 days after the film is applied

I believe that some car owners know that the windows can't be lifted or lowered after the film is applied, but the time spread on the website is not too short. In fact, in early summer, autumn and winter, the time that the window cannot be raised or lowered after the film is applied is about one week. Due to the special material of the film at the lower end of the window, more attention should be paid to avoid lifting the window. Whether the window can be opened or not also needs to be rechecked and confirmed at the store within two weeks after the application.

4. Do not start the anti-fog electric heating wire one month after the film is applied

Within two weeks after the film is applied, the film and glass are not very comfortable. At this time, when the heating demister is turned on, there will be blisters around the heating wire between the glass and the film, which cannot be repaired.

5. After the film is applied, the film is between the glass. If there is misty water or water droplet, please do not carry itThis is an inevitable phenomenon in the drying process. It will disappear after 8-10 weeks of solar irradiation.